View source for Clad

[[CDB|Main]] / [[:Category:Structures|Structures]] / [[:Category:Walls|Walls]] / '''{{PAGENAME}}'''
 
==Description==
Clad is the terminology given to the process of applying materials to an existing reinforced mine wall. This is used in a decorative or aesthetic purpose, and has no further [[Support beam|reinforcement]] effect on the tile it is applied to.

==Clad Options==

{| border=1 class=wikitable
! width=200 |Pavement Type !! width=200|Material Used !! width=200|Image
|-
|| [[Stone brick]] || [[Stone brick]] x10 <br> [[Mortar]] x10 || [[Image:Cobblestone.png|200px|link=Cobblestone]]
|-
|| [[Marble brick]] || [[Marble brick]] x10 <br> [[Mortar]] x10|| [[Image:Marble_bricks.png|200px|link=Marble_bricks]]
|-
|| [[Pottery brick]] || [[Pottery brick]] x10 <br> [[Mortar]] x10|| [[Image:Pottery_bricks.png|200px|link=Pottery_bricks]]
|-
|| [[Round cobblestone]] || [[Rounded stone]] x10 <br> [[Mortar]] x10|| [[Image:Round_cobblestone.png|200px|link=Round_cobblestone]]
|-
|| [[Sandstone brick]] || [[Sandstone brick]] x10 <br> [[Mortar]] x10|| [[Image:Sandstone_bricks.png|200px|link=Sandstone_bricks]]
|-
|| [[Slate brick]] || [[Slate brick]] x10 <br> [[Mortar]] x10|| [[Image:Slate_bricks.png|200px|link=Slate_bricks]]
|-
|| [[Wooden planks]] || [[plank]] x10 <br> [[small nails]] x2|| [[Image:Floor_board.png|200px|link=Floor_board]]
|}

==Method==
To clad a mine wall, one must first reinforce it with a [[support beams|support beam]]. After this is done, the supported rock must be prepared with 10 * [[mortar]] and 10 * [[bricks]]. Only then, will the wall be capable of being clad. Choose your clad type and apply it with the corresponding applicator. [[Trowel|Trowels]] are used for any masonry type, and a [[hammer]] will apply planks.

===Removing clad===
Clad must be removed with the use of a [[crowbar]]. After clad removal, the tile will remain reinforced and unprepared as it was prior to its cladding.

==See also==
* [[Masonry]]




[[Category:Babel/C]]